Programmable Automatic Door Locks
(If
Equipped)
Close the doors and turn on the ignition. Every time you
move the shift lever out
of
PARK (P), all of the doors
will lock. And, every time you stop and move the shift
lever into
PARK
(P),
the doors
will
unlock. If someone
needs to get out while you’re not in PARK
(P),
have that
person use the manual or power lock. When the door is
closed again, it will not lock automatically. Just use the
manual or power lock to lock the door again.
If
you
need to lock the doors before shifting out
of
PARK
(P),
just use the manual or power lock button to lock
the doors.
Customizing Your Automatic Door Locks Feature
You can program the automatic door locks feature to
change to the following modes:
Mode Operation
0
1
2
3
No
automatic door lock or unlock.
All doors automatically lock when shifted
out of PARK (P).
No
automatic door unlock.
All
doors automatically lock when shifted out of
PARK
(P).
Only
the
driver’s door automatically
unlocks when
shifted
into PARK (P).
All doors automatically lock when shifted
out of PARK
(P).
All doors automatically
unlock when shifted into
PARK
(P).
Vehicles
are
delivered programmed in Mode
3.
To
change modes:
1.
Close all the doors and turn the ignition on. Keep
all doors closed throughout this procedure.
2.
Press and hold LOCK on the driver’s power door
3.
Press the LOCK button on the remote lock control
lock switch through Step
4.
transmitter. The automatic door locks will remain in
the current mode.
2-5