yellowblue
5-7
10. Attach the cable at least 18 inches (45 cm) away
from the dead battery, but not near engine parts that
move. The electrical connection is just as good
there, but the chance of sparks getting back to the
battery is much less.
11. Now start the vehicle with the good battery and run
the engine for a while.
12. Try to start the vehicle with the dead battery.
If it won’t start after a few tries, it probably needs service.
13. Remove the cables in reverse order. Take care that
they don’t touch each other or any other metal.
A. Heavy Metal Engine Part
B. Good Battery
C. Dead Battery
To Next Page
Loading...
Need help?
General
