Dinghy Towing
To
tow your vehicle with all four wheels on the ground,
follow these steps:
I
L
m
1.
Position the vehicle
to
tow and then secure it.
2.
Turn the ignition switch to OFF.
3.
Set the parking brake
4.
To
prevent your battery from draining while the
vehicle is being towed, remove the following
fuses from the left side instrument panel fuse block:
WIPER, PCM ACC and IPC/BFC ACC. See
“Instrument Panel Fuse Block (Driver’s Side)” under
Fuses
and
Circuit
Breakers on page
5-81
for the
location
of
these fuses.
5.
Turn the ignition switch
to
ACCESSORY.
6.
Shift your transaxle
to
NEUTRAL
(N).
7.
Release the parking brake.
Remember to reinstall the fuses once you reach your
destination. To reinstall a fuse do the following:
1.
Set the parking brake.
2.
Remove the key from the ignition switch.
3.
Put the fuse back in
4-32
To Next Page
Loading...
