The windshield washer
fluid reservoir is located in
the engine compartment
towards the front of
the vehicle.
Notice:
Open the cap with the washer symbol on it. Add washer
fluid until the tank is full.
When using concentrated washer fluid, follow
the manufacturer’s instructions for adding
water.
Don’t mix water with ready-to-use washer fluid.
Water can cause
the
solution
to freeze
and
damage your washer fluid tank and other parts
of the washer system.
Also,
water doesn’t
clean as well as washer fluid.
Fill your washer fluid tank only three-quarters
full when
it’s
very cold. This allows for
expansion if freezing occurs, which could
damage the tank if
it
is
completely full.
Don’t use engine coolant (antifreeze)
in
your
windshield washer.
It
can damage your
washer system and paint.
5-37
To Next Page
Loading...
