A
The tools you’ll be using include the jack
(A)
and wheel
wrench
(B).
Removing the Flat Tire and Installing
the Spare Tire
1.
If
your vehicle has a wheel cover or hubcap that
has a plastic wheel nut cap, then loosen the
plastic nut caps (you may need to use the wheel
wrench to loosen them).
Do
not pry
off
wheel covers
or
center caps that have plastic wheel nut caps.
2.
Remove the wheel cover or center cap.
3.
If your vehicle has a wheel cover or hubcap without
plastic wheel nut caps, gently pry on the edge
of
the plastic wheel trim
to
remove it from the wheel to
find the wheel nuts.
5-64
To Next Page
Loading...
