Have you recently changed brands
of
fuel‘?
If
so,
be sure
to
fuel your vehicle
with
quality fuel (see
“Fuel” in the Index). Poor fuel quality will cause your
engine not
to
run as efficiently
as
designed. You
may
notice
this
as
stalling after start-up, stalling when you
put the vehicle into gear, misfiring, hesitation
on
acceleration or stumbling
on
acceleration. (These
conditions may go away once the engine is warmed up.)
This will
be
detected by the system and cause the light
to turn on.
If
you experience one or more of these conditions,
change the fuel brand you use.
It
will require at least one
full
tank
of
the proper fuel to turn the light off.
If
none
of
the above steps have made the light turn off,
have your retailer or qualified service center check the
vehicle. Your retailer has
the
proper test equipment and
diagnostic tools to fix any mechanical
or
electrical
problems that may have developed.
Engine
Oil
Pressure
Gage
OIL
0-
The
oil
pressure gage shows
the engine oil pressure
in
psi (pounds per square inch)
when the engine is running.
Oil
pressure
may
vary with engine speed, outside
temperature and
oil
viscosity, but readings above the
low pressure zone indicate the normal operating range.
2-59
To Next Page
Loading...
