e
+#
HEATER: This setting directs warmed air through
the heater floor outlets and windshield defroster outlets.
we
+#
BLEND:
Airtlow is divided equally between the
heater floor outlet and the windshield defroster outlets.
%?
DEFROST This setting directs most air through
the windshield defroster outlets and some through the
heater outlets.
Air Conditioning
On hot days, open the windows long enough
to
let hot
inside air escape. This reduces the time
it
takes for your
vehicle to cool down. Then keep your windows closed
for the air conditioner to work its best.
For quick cool-down on very hot days, use
MAX
A/C
with the temperature knob turned counterclockwise.
This setting should be used to keep odors and/or dust
from entering the vehicle. For normal cooling on hot
days, use A/C with the temperature knob turned
counterclockwise.
On
cool but sunny days, use BI-LEVEL A/C to deliver
warm air to the floor and cooler air to the instrument
panel outlets.
When the air conditioner is on,
you
may sometimes
notice slight changes
in
your vehicle‘s engine speed and
power. This is normal because the system is designed to
cycle the compressor on and off to keep the
desired temperature.
Heating
The heater works best
if
you keep your windows closed
while using
it.
On cold days, use
HEATER
with
the
temperature knob turned clockwise.
BLEND
is useful
in
cool weather when you have fog or ice on the
windshield or side windows.
If
you use the optional engine coolant heater before
starting your engine, your heating system will produce
warmer
air
faster to heat the passenger compartment
in
cold weather. See “Engine Coolant Heater”
in
the Tndex.
3-3
To Next Page
Loading...
