Unlocking
the Theft-Deterrent Feature After a
Power
Loss
Enter your secret code as follows; pause no more than
15
seconds between steps:
1.
LOC
appears when the ignition is on.
2.
Press MN and
000
will appear on the display.
3.
Press
MN
again to make the last two digits agree
with your code.
4.
Press HR to make the first one or two digits agree
with your code.
5.
Press AM-FM after you have confirmed that the
code matches the secret code you have written down.
The display will
show
SEC, indicating the radio is
now operable and secure.
If you enter the wrong code eight times, INOP will
appear
on
the display.
You
will have to wait an hour
with the ignition on before you can try again. When you
try again, you will only have three chances
to
enter the
correct code before INOP appears.
If you lose or forget your code, contact your retailer.
Disabling
the Theft-Deterrent Feature
Enter your secret code as follows; pause no more than
15
seconds between steps:
1. Turn the ignition to ACCESSORY or RUN.
2.
Turn the radio
off.
3. Press
the
1
and
4
buttons together. Hold them down
until
SEC shows on the display.
4.
Press MN and
000
will appear
on
the display.
5.
Press MN again to make
the
last two digits agree
with your code.
6.
Press
HR
to make the first one or
two
digits agree
7.
Press AM-FM after you have confirmed that the
with your code.
code matches the secret code you have written down.
The display will show
---,
indicating that the radio
is
no longer secured.
If the code entered is incorrect, SEC will appear
on
the
display. The radio
will
remain secured until the correct
code is entered.
When battery power
is
removed and later applied to a
secured radio, the radio won’t turn on and LOC will
appear on the display.
3-14