Cleaning Leather
Use a soft cloth with lukewarm water and
a
mild soap
or
saddle soap and wipe dry
with
a soft cloth. Then, let the
leather dry naturally. Do not use heat
to
dry.
For
stubborn stains, use
a
leather cleaner. See your
retailer for this product.
0
Never-
use
oils,
varnishes, solvent-based
or
abrasive
cleaners, furniture polish or shoe polish on leather.
Soiled or stained leather should be cleaned
immediate,ly.
If
dirt is allowed
to
work into the
finish,
it
can harm the leather.
Cleaning the Top
of
the Instrument Panel
Use
only
mild soap and water to clean the top surfaces
of
the
instrument panel. Sprays containing silicones or
waxes may cause annoying reflections
in
the windshield
and
even make
it
difficult
to
see through the windshield
under certain conditions.
Care
of
Safety Belts
Keep belts clean and dry.
Do
not bleach or dye safety belts. If you do, it
may severely weaken them.
In
a crash, they
might not be able to provide adequate protection.
Clean safety belts only with mild soap and
lukewarm water.
Glass
Glass
should be cleaned often.
GM
Glass Cleaner
(GM
Part
No.
1050427) or a liquid household glass cleaner
will remove normal tobacco smoke and dust films on
interior glass.
Don't use abrasive cleaners
on
glass, because
they
may
cause scratches. Avoid placing decals on the inside rear
window, since they may have
to
be scraped off later.
If
abrasive cleaners are used on the inside of the rear
window, an electric defogger element may be damaged.
Any
temporary license should not be attached across the
defogger grid.
6-47
To Next Page
Loading...
