Throttle Linkage Inspection
Inspect the throttle linkage
for
interference or binding,
and for damage or missing parts. Replace parts
as
needed. Replace any cables that have high effort or
excessive wear.
Do
not lubricate accelerator and cruise
control cables.
Drive Axle Service
Check rear/front axle fluid level and add as needed.
Check constant velocity joints and axle seals for leaking.
Transfer Case (All-Wheel Drive) Inspection
Every
12
months or at oil change intervals, check front
axle and transfer case and
add
lubricant when necessary.
Oil the control lever pivot point and
all
exposed control
linkage. Check vent hose at transfer case
for
kinks and
proper installation.
Brake System Inspection
Inspect the complete system. Inspect brake lines and
hoses for proper hook-up, binding, leaks, cracks,
chafing, etc. Inspect disc brake pads for wear and rotors
for surface condition. Inspect other brake parts,
including calipers, parking brake, etc. Check parking
brake adjustment.
You
may need to have your brakes
inspected more often
if
your driving habits or conditions
result
in
frequent braking.
7-44
To Next Page
Loading...
