Lap
Belt
When you sit in the center rear seating position, you
have a lap safety belt which has a retractor.
1.
Pick up the latch plate and pull the belt across you.
Don’t let it get twisted.
2.
Push the latch plate into the buckle until it clicks.
Pull up on the latch plate to make sure it is secure.
4.
Position and release it the same way as the lap part
of
a lap-shoulder belt.
If the belt isn’t long enough, see “Safety Belt
Extender” at the end of this section. Make sure the
release button on the buckle is positioned
so
you
would be able
to
unbuckle the safety belt quickly if
you ever had to.
3.
Feed the lap belt into the retractor to tighten it.
To Next Page
Loading...
