7.
Push and pull the child restraint
in
different
directions to be sure it
is
secure. Adjust the bucket
seat forward until the
lap
portion of the safety belt
holds the restraint firmly. But don’t move
it
any
more than needed to tighten the lap belt.
To
remove the child restraint, just unbuckle the vehicle’s
safety belt and let it
go
back all
the
way. The safety belt
will move freely again and be ready to work for an adult
or larger child passenger.
6.
To
tighten
the
belt, feed the shoulder belt back into the
retractor while you
push
down
on
the child restraint.
1-40
To Next Page
Loading...
