Windshield Wipers
You
control the windshield wipers by turning the band
with the wiper symbol on it.
For
a
single wiping cycle, turn the band
to
MIST. Hold
it
there
until
the wipers start, then
let
go.
The wipers will
stop after one wipe.
If
you want more wipes, hold the
band on MIST longer.
You
can set the wiper speed for a long or short delay
between wipes. This can be very useful in light rain or
snow. Turn the band
to
choose the delay time. The
closer to
LOW, the shorter the delay.
For steady wiping at low speed, turn the band away
from
you
to the
LOW
position.
For
high-speed wiping,
turn the band further, to
HIGH.
To
stop the wipers,
move the band
to
the
OFF
position.
Be sure to clear ice and snow from the wiper blades
before using
them.
If
they‘re frozen to the windshield,
carefully loosen or thaw them.
If
your blades do become
worn
or
damaged, get new blades or blade inserts.
Windshield Washer
At
the top
of
the multifunction lever, there’s a paddle
marked with the windshield washer symbol and
PUSH.
To spray washer fluid on the windshield, press the
paddle. The wipers will clear the window and then
either stop or return to your preset speed.
In freezing weather, don’t use your washer until
the windshield
is
warmed. Otherwise the washer
fluid can form ice on the windshield, blocking
your vision.
I
I
I I.
To Next Page
Loading...
