Variance is the difference between magnetic north and
geographic north. In some areas, the difference between
the
two can be great enough to cause false compass
readings. If this happens, follow these instructions to set
the variance for your particular location:
1.
Find your location on the zone map. Note your
2.
Press and hold both the MODE and the US/MET
zone number.
buttons in the COMP/TEMP mode.
3.
After five seconds, the compass will acknowledge
the variation mode by displaying the current zone
number. When it does, release both buttons.
4.
Press US/MET until your zone number appears
on
the display.
5.
Press
MODE
to enter your zone number. Your
variance is
now
set and the display will return to the
COMPITEMP mode.
TRIP: Once
in
the TRIP mode, pressing the
MODE button
will
step you through the following
TRIP functions:
AVG ECON: The average
fuel
economy since the
0
INST ECON: Instantaneous fuel economy for the
last reset
is
displayed.
last second of driving is displayed.
RANGE: The display indicates the estimated
distance that can be travelled with the remaining fuel
in
the tank, based
on
the fuel economy for the last
few hours
of
driving.
FUEL USED: The fuel used since the last reset
is displayed.
AVG SPEED: The average speed since the last reset
is displayed.
To reset the trip computer, press the
MODE
and USMET
buttons simultaneously for at least two seconds.
All
functions will be displayed for a half a second once the
system is reset. Reset can only be performed
in
the
AVG
ECON,
FUEL
USED and
AVG
SPEED modes. All three
modes are reset simultaneously.
2-38
To Next Page
Loading...
