25
4. OPERATING THE MACHINE
4.1 LOCATION OF THE MAIN CONTROL ELEMENTS
4.1
(1) Main power switch
(2) Deactivation of the mowing deck disengagement for reversing
(3) Neutral gear engaged indicator
(4) Counter of motor hours
(5) Mowing deck engagement switch
(6) Mowing deck engagement and run down indicator
(7) Parking brake lever
(8) Brake pedal
(9) Differential lock pedal
(10) Mowing deck elevation adjustment lever
(11) Throttle lever
(12) Cruise control disengagement lever
(13) Travel lever
(14) Choke
(15) By-pass lever
(16) Tilting frame control levers
4.2 DESCRIPTION AND FUNCTIONS OF THE CONTROL ELEMENTS
(1) MAIN POWER SWITCH
Serves to start up / shut off the engine. It has the following 4 positions:
Ignition off / turn off the ignition
Turn on / turn off the headlights on the hood
Ignition on, the engine is running.
Start engine – starting position
(2) DEACTIVATION OF THE MOWING DECK DISENGAGEMENT FOR REVERSING
Switch R serves to disengage the automatic mowing deck disengagement function when reversing ( 5.5.1).
The switch needs to be pressed when the mowing deck has already been
automatically disengaged but the blades have not yet stopped rotating
(approx. 4 seconds) or when the mowing deck is started immediately
before the reverse travel pedal is stepped on. Then with every
subsequent change in the travel direction from reverse to forward, the
disengagement of the mowing deck is again reactivated.
To Next Page
Loading...
