Why does my Oleo-Mac Air Cleaner engine not reach full speed and emit smoke?
If your Oleo-Mac Air Cleaner's engine isn't reaching full speed or is emitting excessive smoke, first check the oil fuel mixture, ensuring you're using fresh fuel and the correct 2-cycle oil mix. Also, the air filter might be dirty; clean it following the instructions in the Maintenance-Air Filter Section.
What to do if my Oleo-Mac MB 90 Air Cleaner engine will not start?
If your Oleo-Mac Air Cleaner engine won't start or only runs briefly, the issue might be due to a lack of spark or a flooded engine. Check for a spark at the spark plug tip. If there's no spark, try again with a new spark plug (RCJ6Y). If the engine is flooded, follow the procedure on page 26. If it still fails, repeat the procedure with a new spark plug.
Why does my Oleo-Mac MB 90 Air Cleaner start but not accelerate properly?
If your Oleo-Mac Air Cleaner starts but doesn't accelerate properly or run well at high speed, it could be that the carburetor requires adjustment.
What to do if my Oleo-Mac MB 90 starts but will not idle?
If the Oleo-Mac Air Cleaner starts, runs, and accelerates but won't idle, it might be because the carburetor needs adjustment.
Why is the air flow low on my Oleo-Mac MB 90 Air Cleaner?
If your Oleo-Mac Air Cleaner engine starts and runs, but the airflow is low, it could be due to a blocked safety guard or a damaged impeller. Try cleaning the safety guard.
How to fix poor liquid flow rate in Oleo-Mac MB 90 Air Cleaner?
If the Oleo-Mac Air Cleaner starts and runs, but the liquid flow rate is poor, the liquid filter or pipes could be blocked. Clean or replace them to resolve this.
General| Brand | Oleo-Mac |
|---|---|
| Model | MB 90 |
| Category | Air Cleaner |
| Language | English |
To Next Page