Need help?Do you have a question about the OleumTech Wio BR-0900-RM4 and is the answer not in the manual?
Details critical safety warnings regarding installation, voltage, hazardous locations, and modifications.
Covers FCC compliance, RF exposure guidelines, interference, and certification standards.
Describes the system's instant I/O connectivity and cost-effective solution for monitoring and control.
Details the unidirectional analog signal flow from Radio A to Radio B.
Explains programmable digital signal direction between Radio A and B based on DIP switch settings.
Identifies key hardware features of Radio Module A, including DIP switches, LEDs, and connectors.
Identifies key hardware features of Radio Module B, including DIP switches, LEDs, and connectors.
Explains how to diagnose RF health using the front panel LED and signal quality indicators.
Details how to control the transmission speed (1 second or 400 ms) using the Tx Button.
Configures digital I/O signal direction using DIP switches 1 and 2 on Radio A and B.
Controls digital output fail-safe modes and monitors RF health using DIP switch 3.
Configures analog output fail-safe modes for Radio B using DIP switches 4 and 5.
Sets RF transmit power for 900 MHz systems using DIP switch 6.
Selects RF channels for 900 MHz and 2.4 GHz systems using DIP switches 7 and 8.
Details steps for outdoor installation, including enclosure, DIN rail mounting, and antenna placement.
Provides instructions and images for removing the Radio Module from the DIN rail.
Illustrates power wiring connections (9-30 Vdc) and highlights reverse polarity protection features.
Shows wiring diagrams for analog 4-20 mA inputs on Radio Module A, with internal and external loop power options.
Details wiring for analog 4-20 mA outputs on Radio Module B, including loop impedance calculations.
Explains wiring for digital/discrete inputs, including dry contact and voltage level outputs.
Covers wiring for digital/discrete outputs, specifying inductive load and voltage level outputs.
Lists technical specifications for I/O, hardware features, dimensions, and warranty.
Details technical specifications for radio communication type, frequency, security, and RF performance.
Provides specifications for analog inputs on Radio Module A, including accuracy and impedance.
Lists specifications for analog outputs on Radio Module B, including voltage range and fail-safe modes.
Details specifications for digital I/O channels, including signal direction and input/output ratings.
Covers environmental conditions, protection degrees, RF emissions, and safety classifications.
General| Brand | OleumTech |
|---|---|
| Model | Wio BR-0900-RM4 |
| Category | I/O Systems |
| Language | English |
To Next Page