Need help?Do you have a question about the Olide DSW-120N and is the answer not in the manual?
General| Brand | Olide |
|---|---|
| Model | DSW-120N |
| Category | Gate Opener |
| Language | English |
Demonstrates pull and push arm installation for door opening direction.
Details mounting the base plate with screws and cable hole placement.
Explains attaching the pull arm slide rail and adjusting the stopper.
Covers fixing the push arm holder and adjusting its length and angle.
Hooks the component assembly onto the base plate.
Details the process of opening and installing the cover.
Illustrates connecting the pull arm to the operation system.
Shows connecting the push arm to the operation system.
Explains the layout and function of the control panel components.
Details wiring the system to a keypad for control.
Shows how to connect a microwave sensor for automatic door activation.
Illustrates wiring PIR sensors for motion detection.
Explains connecting a safety motion top scan sensor.
Details wiring standard push buttons for door operation.
Shows wiring for accessibility push buttons.
Explains wiring wireless push buttons for accessibility.
Details wiring magnetic locks for security.
Illustrates wiring electric locks for enhanced security.
Shows wiring touchless hand sensors for activation.
Details wiring for synchronizing two doors to operate together.
Explains the code learning process for wireless push buttons.
Describes how to encode and use the remote control for door operation.
Guides on using the hand programmer for system adjustments.
Provides a flowchart for adjusting various operational parameters.
To Next Page