Need help?Do you have a question about the OLIMAC Drago GT and is the answer not in the manual?
Read all safety messages in the manual and on corn head decals.
Explains safety alert symbols: Danger, Warning, and Caution, and their meanings.
Provides essential safety tips for operating the corn head and combine.
Outlines safety measures before performing repairs, lubrication, or adjustments.
Details the placement and purpose of safety decals on the corn head.
Illustrates the locations of safety decals on the rigid corn head front and rear views.
Shows the placement of safety decals on the folding corn head front and rear views.
Provides detailed descriptions and meanings of various safety decals used on the equipment.
Defines the proper application and purpose of the corn head equipment.
Specifies environmental conditions and intended work cycles for the equipment.
Describes how the corn head operates and the operator's interactions with the combine.
Lists forbidden operations and conditions that must not be used with the machine.
Details how to place the corn head in a safe position for shipping or storage.
Describes the use of a stand for upright storage and ease of access.
Provides instructions on how to correctly position and secure the corn head on a stand.
Explains safe procedures for lifting and lowering the corn head using various equipment.
Step-by-step guide for securely attaching the corn head to the combine.
Detailed procedure for safely detaching the corn head from the combine.
Explains the requirement for auxiliary hydraulics for optional functions.
Instructions for correctly aligning PTO shafts to prevent damage and ensure proper operation.
Guidelines for safely transporting the corn head by truck, including support and securing methods.
Procedures for transporting the corn head attached to the combine, including road safety.
Overview of how the corn head functions in the field and its main components.
Details on built-in protection mechanisms for key components against foreign objects.
Explains the flow of power through the corn head from the PTO shaft to various gearboxes.
Describes the function and design of deck plates for stripping ears from stalks.
Instructions for folding and unfolding the corn head, with safety precautions.
Information on the optional automatic header height control system.
Pre-operation checks and procedures to ensure the corn head is ready for field use.
Guidance on initial operation, familiarization, and safe startup procedures.
Details on adjusting the corn head angle for optimal performance and avoiding damage.
Step-by-step guide for measuring and adjusting the corn head angle.
Explains how to adjust the adapter frame for course angle correction based on combine type.
Instructions for adjusting gathering points to ensure proper snout operation and prevent damage.
Defines the center pivot line and its importance for correct gathering point setup.
Information on replacing and adjusting stalk roller knives for optimal stalk processing.
Procedure for safely removing the stalk roller assembly from the row unit.
Detailed steps for replacing stalk roller knives, emphasizing correct positioning.
Guide to adjusting stalk roller position side-to-side for different crop conditions.
Instructions for adjusting trash knives to prevent weeds and trash wrapping around stalk rollers.
Procedures for checking and ensuring correct side-to-side and vertical alignment of row units.
Details on adjusting deck plate openings for various field conditions and crop types.
How to adjust the maximum opening of the deck plates using the cam mechanism.
Procedure for checking and adjusting the minimum opening of the deck plates.
Instructions for adjusting the return pressure of the deck plates.
Information on gathering chain tension and replacement for optimal feeding.
How to check and adjust the tension of the gathering chains.
Procedure for inspecting and replacing gathering chains based on wear.
Instructions for timing gathering chains, including adjustments for down corn.
Guide to adjusting the position of gathering chain guides for different feeding conditions.
How to adjust the back-feed shield to contain material and prevent it from entering the combine.
Lists required lubricants and their capacities for various components of the corn head.
Provides part numbers for the lubricants recommended for the corn head.
Details recommended lubrication intervals for normal and severe service conditions.
Maintenance procedures to be performed before the start of the harvesting season.
Instructions for checking fluid levels in gearboxes before seasonal operation.
Pre-season checks and adjustments for gathering chain tension and stalk roll pinch point.
Maintenance tasks to be performed every 20 hours of operation.
Greasing procedures for stalk rollers and folding tow shaft coupler.
Inspection of chopping knives for wear or damage every 20 hours.
Maintenance tasks to be performed every 100 hours of operation.
Checking oil levels in intermediate, row unit, heavy duty, and step-up gearboxes.
Greasing procedures for jackshaft support bearing, gathering chain tensioner, drive sprockets, and idler sprockets.
Adjusting gathering chain tension and cleaning deck plates every 100 hours.
Maintenance tasks to be performed every 250 hours or annually.
Lubrication of gathering chains every 250 hours or annually.
Inspection and replacement of gathering chain wear guides.
Chart to diagnose and solve common operating problems with the corn head.
Table listing models, row spacing, weights, and transport widths for rigid corn heads.
Standard bolt torque specifications in SAE and Metric units for various bolt sizes.
General| Brand | OLIMAC |
|---|---|
| Model | Drago GT |
| Category | Farm Equipment |
| Language | English |
To Next Page
