Olimpia splendid AIR PRO

Questions and Answers

T
thomas69Jul 25, 2025
Why doesn't my Olimpia splendid AIR PRO cool efficiently?
- L
  lori88Jul 26, 2025
  If your Olimpia Splendid Heater doesn't cool efficiently, several factors could be at play. Start by ensuring that the air filters aren't clogged with dust, fluff, or animal hair; if they are, switch off the appliance and clean them. Also, check the drain pipe to make sure it's connected and not obstructed; if it is, switch off the appliance, disconnect the pipe, remove any blockage, and reconnect it. Confirm that the temperature setting isn't too high by reducing the set temperature. Make sure all windows and doors in the room are closed, and verify that the room size isn't too large for the unit's cooling capacity. Finally, eliminate any heat sources within the room if possible.
R
Rachel MooreAug 1, 2025
Why is my Olimpia splendid AIR PRO Heater so noisy and vibrating?
- G
  gstokesAug 2, 2025
  If your Olimpia Splendid Heater is noisy and vibrates excessively, it might be due to an uneven surface. Ensure the appliance is placed on a flat and leveled surface. Also, check if the air filters are clogged with dust, fluff, or animal hair. If they are, switch the appliance off and clean the filters.
B
Brian NormanAug 10, 2025
Why does my Olimpia splendid AIR PRO Heater only work for a short time?
- P
  Peter PhamAug 10, 2025
  If your Olimpia Splendid Heater only works for a short period, the set temperature might be too close to the ambient temperature. Try lowering the set temperature. Also, check if the suction of outside air is obstructed and remove any obstructions.
N
Nicole JonesAug 17, 2025
Why is my Olimpia Splendid Heater leaking water during transport?
- M
  Melinda ToddAug 17, 2025
  If water leaks from your Olimpia Splendid Heater during transport, it's likely because the unit was tilted or laid flat. Empty the water before moving the appliance to prevent leaks.

Summary

0 - WARNINGS

0.3 - GENERAL WARNINGS

Outlines essential safety precautions to prevent fire, electric shocks, and injury.

0.4 - PROPER USE

Defines the intended use of the air conditioner and manufacturer responsibility for improper use.

0.5 - HAZARDOUS ZONES

Specifies environments where the climate controller must not be installed due to hazards.

0.6 - WARNINGS FOR R290 REFRIGERANT GAS

Details safety precautions for the R290 refrigerant gas used in the appliance.

2 - INSTALLATION

2.2 - WARNINGS

Lists important warnings related to installation, including surface stability and grounding.

2.4 - ELECTRICAL CONNECTION

Details checks before power connection, including voltage, frequency, and grounding requirements.

3 - USE OF THE APPLIANCE

3.1 - CONTROL PANEL SYMBOLS AND KEYS (Fig.B)

Details the symbols and functions of the control panel buttons for operating the unit.

3.2 - REMOTE CONTROL KEYS (Fig. C)

Explains the functions of each button on the remote control for operating the air conditioner.

3.3 - USE OF THE REMOTE CONTROL

Provides guidance on handling the remote control, its operation, and battery management.

3.4 - USE OF THE APPLIANCE

General operating instructions, including preliminary steps and compressor delay.

3.4.a - Preliminary operations

Steps to prepare the appliance before starting, including placement and power connection.

3.4.b - Appliance switching on;off

Instructions on how to turn the air conditioner on and off using the controls.

3.5 - AUTO MODE (Automatic)

Explains the automatic mode adjusting operation based on ambient temperature.

3.6 - COOLING MODE (COOL)

Details how to activate and use the cooling mode, including fan speed and temperature settings.

3.8 - DEHUMIDIFICATION MODE (DRY)

3.9 - VENTILATION MODE (FAN)

3.10 - HEATING MODE (HEAT)

4 - MAINTENANCE AND CLEANING

4.1 - CLEANING

4.2 - ΜΑΙNTENANCE

4.2.b Error codes

Lists common error codes and provides troubleshooting steps for appliance anomalies.

6 - TROUBLE SHOOTING GUIDE