Need help?Do you have a question about the Olimpia splendid Nexya S4 E Series and is the answer not in the manual?
General| Brand | Olimpia splendid |
|---|---|
| Model | Nexya S4 E Series |
| Category | Air Conditioner |
| Language | English |
Describes critical safety rules before starting any installation.
Specific safety measures for flammable refrigerants.
Lists additional components available for the system.
Outlines the sequence of installation steps.
Details the components of the indoor unit.
Specific safety warnings related to indoor unit installation.
Guides the selection of an appropriate installation site.
Instructions for securely mounting the indoor unit.
Guide for connecting ducts and accessories to the indoor unit.
Procedure for adjusting air inlet orientation.
Instructions for installing the fresh air duct.
Details on maintaining the motor and drain pump.
Guides the selection of an appropriate installation site.
Instructions for securely fixing the outdoor unit.
Provides dimensions and specifications for different outdoor unit models.
Instructions for installing the drain joint for the outdoor unit.
Guidance on drilling holes for piping and cables.
Important notes and guidelines for drainpipe setup.
Detailed instructions for installing the indoor drainpipe.
Specific installation for units equipped with a drain pump.
Specific installation for units without a drain pump.
Procedure to verify the drain system is working correctly.
Critical safety rules for handling refrigerant.
Guidelines on pipe length and height differences.
Specific caution regarding oil traps in piping.
Details on allowed piping lengths.
Specifications for connecting pipes.
Instructions for preparing refrigerant pipes.
Instructions for flaring pipe ends for a proper seal.
Procedure for connecting refrigerant pipes.
Warnings about pipe insulation and connection tightness.
Guidelines on bending refrigerant pipes.
Essential safety measures for electrical wiring.
Information about fuses used in the unit.
Instructions for wiring the outdoor unit.
Instructions for wiring the indoor unit.
How to use the wire controller for specific settings.
Important cautions regarding airflow adjustment.
Electrical requirements for indoor units.
Electrical requirements for outdoor units.
Electrical requirements for independent power setups.
Electrical specifications for inverter type units.
Safety rules for air evacuation.
Steps for performing air evacuation.
Guidelines for adding refrigerant after evacuation.
Checks to perform before starting the test run.
Detailed procedure for conducting the test run.
Area checks before servicing for flammable refrigerants.
Safe working procedures for servicing.
Workspace preparation and safety.
Detecting flammable refrigerant presence.
Ensuring fire extinguishing equipment is available.
Eliminating potential ignition sources.
Ensuring adequate ventilation during servicing.
Checks on refrigeration equipment components.
Safety checks for electrical components.
Specifics on repairing intrinsically safe parts.
Checks on cabling for wear and environmental effects.
Methods for detecting flammable refrigerants.
Acceptable methods for leak detection.
Procedures for removing and evacuating refrigerant.
Steps for charging refrigerant.
Procedures for safely decommissioning the unit.
Labelling requirements for decommissioned equipment.
Procedures for refrigerant recovery.
Guidelines for moving and storing units.
Overview of wire controller capabilities.
Explanation of the wire controller's screen elements.
Detailed description of each button's function.
How to operate the unit in different modes (Auto, Cool, Heat, etc.).
How to set and manage timer functions.
To Next Page
