EasyManua.ls Logo

Olimpia splendid PELER TOWER - 2 - INSTALLATION; 2.2 - WARNINGS

Olimpia splendid PELER TOWER
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
EN - 11
2 - INSTALLATION
2.1 -
HANDLING THE APPLIANCE
Transport and handling of the appliance must be carried out in ver-
tical position.
Rotate the appliance into horizontal position and mount the base (3),
as illustrated in gure B1.
CAUTION
Moving the cooler on delicate ooring (e.g. wooden ooring):
Empty the water compartments.
Take great care when moving the cooler as the wheels could mark
the ooring. Although the wheels are made from a rigid material
and are swivelling, they could get damaged by use or excessive
dirt.
It is recommended to check that the wheels are clean and that
they can move freely.
2.2 -
WARNINGS
A failure to respect what follows may cause damages to the
appliance.
a. Install the appliance on a at, stable
surfaceandontheoor.
b. The appliance must only be connected
to earthed power outlets.
c. Make sure that curtains or other objects
donotobstructtheairsuctionlters.
d. Make sure to keep a minimum distance
of15cm(Fig.B)betweenthecoolerand
theadjacentgures.