PELER TOWER
ENGLISH
EN - 20
4 -
MAINTENANCE AND CLEANING
Before proceeding with any maintenance
and cleaning intervention, always make
sure you disconnected the power plug
from the power socket.
Do not use water to clean the internal parts of the appliance;
risk of electric shocks.
4.1 - CLEANING
4.1.a - Cleaning the appliance and the remote control
a. Use a dry cloth to clean the appliance and the remote control.
b. It is possible to use a cloth moistened with cold water to clean the appliance
in case it’s very dirty.
Do not use a chemically treated or antistatic cloth to clean the appliance.
Do not use gasoline, solvent, polish or similar solvents.
These products could cause the breakage or deformation of the plastic
surface.
4.1.b - Cleaning the lters
Operate as follows:
a.
UseaPhillipsheadscrewdriver(notincluded)toremovethescrews(22)(g.N).
b. Pressthetwocatches(25)toremovetheairlter(9)fromthebodyofthe
appliance(g.O).
c. Removethepaperlter(10)fromthebodyoftheappliance.
d. Cleanbothlters(9and10)withwaterandneutralsoap.Rinsethelterswell
with clean water.
e. Ifnecessary,useasoftbrushtocleantheairltermoredeeply(9).