What to do if my Olimpia Splendid Fan does not operate?
If your Olimpia Splendid Fan isn't operating, there could be several reasons. First, ensure the unit is correctly wired to the main supply to address potential voltage issues. Secondly, verify that the ventilation unit properly couples with the support base. Lastly, make sure the DISABLE input is open.
How to fix Olimpia Splendid Fan when no icon is shown on the controller LCD display?
If no icon is showing on your Olimpia Splendid Fan's controller LCD display, here's what to check: * Change the batteries as they might be dead. * Ensure that batteries are present in the controller. * Correctly position the batteries if they are wrongly placed.
Why is the yellow light on my Olimpia Splendid Fan fixed?
A fixed yellow LED on your Olimpia Splendid Fan indicates that the filters are dirty. You need to perform filters maintenance or replacement and reset filter operation.
Why does my Olimpia Splendid Fan operate at maximum speed?
Your Olimpia Splendid Fan might be operating at maximum speed because the Boost functionality is activated. You can either wait for the boost timing to end (15 minutes) or deactivate the boost function by pressing the button.
What does it mean when the icon flashes on the LCD display of Olimpia Splendid Fan?
If the icon flashes on the LCD display of your Olimpia Splendid Fan, it means the batteries are low. You should change the batteries.
Why does the speed of my Olimpia Splendid Fan suddenly increase?
If the speed of your Olimpia Splendid Fan suddenly increases, it's likely because the smart humidity control is activated. You can either wait for the smart humidity control phase to end (10 minutes) or deactivate the humidity control function by pressing the button for 5 seconds.
What does fixed blue led on Olimpia Splendid Fan mean?
A fixed blue LED on your Olimpia Splendid Fan indicates that the boost function is activated. You can wait until the boost timing ends (15 minutes) or deactivate the boost function by pressing the button.
What does fixed red led on Olimpia Splendid Fan mean?
A fixed red LED on your Olimpia Splendid Fan means that the antifrost protection is activated. Wait until the antifrost phase ends (30 minutes).
What to do if Olimpia Splendid Fan does not execute commands from the remote control?
If your Olimpia Splendid Fan isn't responding to the remote control, it might be due to a lack of communication between the unit and the remote. Try moving closer to the unit and point the controller towards the receiver on the left side of the unit.
What does flashing blue led on Olimpia Splendid Fan mean?
A flashing blue LED on your Olimpia Splendid Fan indicates that the smart humidity control is activated. Wait until the humidity control phase ends (10 minutes).
General| Model | SITALI SF 150 |
|---|---|
| Category | Fan |
| Speed Settings | 3 |
| Oscillation | Yes |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
To Next Page