Olimpia splendid Unico EDGE - 3.5.12-3.5.13 - Timer and Clock Setting

46
D10
47
D10
T1
T2
EN - 28
ENGLISH
• Thenightkeyisnotavailableforoperationindehumidicationandventilationonly.
• Thenightkeycanbedisabledatanytime(ideallyuponawakening)bypressingbuttonB3 once more.
• Atthispoint,thefantemperatureandspeedsettingsthatweresetbeforeactivatingthisfunctionare
restored.
3.5.12 - Timer setting
• TheappliancelogicallowstheUsertomakeuseoftwodifferenttimerprograms(seeparagraph3.5.14),
thankstowhichtheappliancecanbedeactivatedandactivated(orviceversa)wheneverdesired(for
example,itcanbeactivatedshortlybeforereturninghomesoastondanalreadypleasanttemperature
intheroom).
• Firstly,ifitisdesiredtomakeuseofthesefunctions,setthecorrecttime(seeparagraph3.5.13)andthen
setthetimerasyouprefer.
3.5.13 - Timer and clock setting (Fig.46-47)
Tosettime,workwiththeremotecontrolasfollows:
a. PresskeyB6(SETTIMER)untilwhenthehourindicationh(D10)appearsonthedisplay
b. SetthehourwithkeysB7(+and-).
c. PressthekeyB6untilwhentheminutesindicationm(D10)appearsonthedisplay.
d. SettheminuteswithkeysB7(+and-).
e. PresskeyB6tosavethetimeandproceedwiththetimerprogramming.