Olimpia splendid Unico Easy

Other manuals for Olimpia splendid Unico Easy

Instructions For Installation, Use And Maintenance80 pages

Questions and Answers

J
Jared LeeAug 18, 2025
Why my Olimpia splendid Unico Easy Air Conditioner won't turn on?
- D
  Dana LopezAug 18, 2025
  Your Olimpia Splendid air conditioner might not be turning on due to several reasons: * There could be no power. Wait for the power to be restored. * The plug might be disconnected: Plug in the conditioner. * Excessive water accumulation inside: Drain the water by removing the plug. Contact the Assistance Centre if this occurs frequently. * The timer might be on: Switch off the timer.
G
gregoryjodyAug 20, 2025
What to do if my Olimpia splendid Unico Easy Air Conditioner is not cooling the room?
- T
  timgarciaAug 20, 2025
  If your Olimpia Splendid air conditioner isn't cooling the room, there might be several reasons: * A window could be open: Close the window. * Heat sources are present: Eliminate any sources of heat in the room. * The set temperature is too high: Lower the set temperature. * The air filter is clogged: Clean the filter.
J
James CrossAug 22, 2025
Why is my Olimpia splendid Unico Easy Air Conditioner running but not cooling?
- J
  Justin MiddletonAug 23, 2025
  If your Olimpia Splendid Air Conditioner is running but not cooling the room, there might be several reasons: * A window could be open; make sure to close it. * There might be a heat source in the room, such as a burner or lamps; try to eliminate it. * The set temperature might be too high; lower it. * The air filter could be clogged; clean it. * The air conditioner's power might not be adequate for the room's conditions or size.
J
Johnny LopezAug 25, 2025
What to do if my Olimpia Splendid Air Conditioner is not working?
- J
  Juan LloydAug 26, 2025
  If your Olimpia Splendid Air Conditioner isn't working, here are a few things to check: * Make sure there is power available. * Ensure the plug is properly inserted into the outlet; if not, insert it. * There might be excessive water accumulation inside; remove the cap to drain the water. If this happens frequently, contact the Assistance Center. * The timer might be activated; deactivate it.
S
Sheryl YoungAug 27, 2025
What to do if Olimpia splendid Unico Easy is overheating?
- C
  Carolyn RodgersAug 27, 2025
  If your Olimpia Splendid air conditioner is overheating, causing a yellow and red LED to flash, it could be due to: * Excessive overheating of the condensing coil: Eliminate obstructions in the air inflow and outflow tubes outside. * A faulty condensing fan: Call the service center to clean the inside of the conditioner. * If these steps don't resolve the issue: Call the Assistance Centre.
S
Samantha Olson DVMAug 30, 2025
Why does my Olimpia splendid Unico Easy only work for a short time?
- L
  Lydia PowellAug 30, 2025
  Your Olimpia Splendid air conditioner might be running only for a short time because: * The set temperature is too close to room temperature: Lower the set temperature. * There are obstructions blocking external air intake: Remove the obstructions.
O
omar71Sep 1, 2025
What does it mean if two green LEDs and one yellow LED are flashing on my Olimpia Splendid Air Conditioner?
- C
  Christopher GrahamSep 2, 2025
  If two green LEDs and one yellow LED are flashing on the control panel of your Olimpia Splendid air conditioner, it indicates a faulty ambient temperature probe. Call the Assistance Centre.
L
Laura ThomasSep 4, 2025
What does it mean if one green and one yellow LED are flashing on my Olimpia Splendid Air Conditioner?
- D
  dlongSep 4, 2025
  If one green and one yellow LED are flashing on the control panel of your Olimpia Splendid air conditioner, this indicates a faulty condenser temperature probe. Call the Assistance Centre.
F
frankrossSep 6, 2025
Why does my Olimpia splendid Unico Easy Air Conditioner only run for a short time?
- A
  Arthur CooperSep 7, 2025
  If your Olimpia Splendid Air Conditioner is only running for a short time, consider the following: * The set temperature might be too close to the ambient temperature; try lowering the set temperature. * There might be obstacles blocking the external air intake; remove any obstructions.
M
Misty AguirreSep 9, 2025
What to do if yellow and red LEDs are flashing on my Olimpia splendid Unico Easy?
- N
  nelsondonnaSep 9, 2025
  If a yellow and red LED are flashing on the control panel of your Olimpia Splendid Air Conditioner, it indicates excessive overheating of the condensing coil. Clear any obstructions on the air intake and outlet pipes outside the building.

Summary

1 GENERAL INFORMATION

1.2 SYMBOLS

Explains the meaning of various pictograms used in the manual.

1.3 PROPER USE

Defines the intended purpose and limitations of the appliance.

1.4 LIST OF ACCESSORIES SUPPLIED

Lists all included components and accessories with the unit.

1.4.1 Storage

Guidelines for storing the unit's packaging correctly.

1.4.2 Receipt and unpacking

Procedures for checking and unpacking delivered units.

2 INSTALLATION

2.1 INSTALLATION REQUIREMENTS

Specifies essential requirements for a proper installation.

2.1.1 Room dimensions and features

Details on calculating thermal loads based on room characteristics.

2.1.2 Choosing installation position

Guidance on selecting the optimal location for the unit.

2.2 UNIT INSTALLATION

Instructions for mounting the air conditioner unit.

2.2.1 Drilling the wall

Instructions for safely and correctly drilling mounting holes.

2.3 PERIODICAL MAINTENANCE

Guidelines for regular maintenance of the unit.

3 USE AND MAINTENANCE

3.1 IMPORTANT RECOMMENDATIONS

Essential advice and warnings for users regarding operation.

3.2 NAMES OF PARTS

Identification of the main components of the air conditioner.

3.2.1 List of Units

Identification of the main components of the air conditioner.

3.2.2 Control panel

Detailed explanation of the control panel buttons and indicators.

3.3 REMOVING THE REMOTE CONTROL

Steps for safely removing the remote control from its holder.

3.5 INSTALLING THE BATTERIES

Instructions for correctly inserting batteries into the remote control.

3.6 REMOTE CONTROL

Overview of the remote control's functions and operation.

3.4 STARTING;STOPPING THE APPLIANCE

How to turn the air conditioner on and off using the main button.

3.7 STARTING;STOPPING THE APPLIANCE (Button T1)

Specific instructions for using the T1 button to start/stop the unit.

3.8 COMFORT BUTTON (AUTOMATIC)

Explanation of the automatic comfort mode function.

3.9 COOLING FUNCTION

How to activate and use the cooling mode of the air conditioner.

3.10 DEHUMIDIFIER ONLY FUNCTION

Guide to using the dehumidifier-only mode for optimal humidity control.

3.11 FAN ONLY FUNCTION

Instructions for operating the unit solely in fan mode.

3.12 HEATING OPERATION

How to activate and use the heating mode of the air conditioner.

3.13 FAN SPEED CONTROL

How to adjust the fan speed using the T5 button.

3.14 NIGHT COMFORT BUTTON

Explanation of the night comfort mode for optimized sleep.

3.15 SETTING THE FUNCTION PROGRAM MODES

Guide to programming the unit's timer and operating modes.

3.16 SETTING THE EXACT TIME

Steps to set the current time on the air conditioner.

3.17 SETTING THE START;STOP TIMES OF THE 1 ST AND 2 ND FUNCTION PROGRAMS

How to program the start and stop times for two distinct operating cycles.

3.18 ENABLING AND DISABLING THE FUNCTION PROGRAMS

Instructions for activating or deactivating programmed functions.

3.19 RESETTING ALL REMOTE CONTROL FUNCTIONS

How to reset the remote control to its default settings.

3.20 HOW TO MANAGE THE APPLIANCE WITHOUT THE REMOTE CONTROL

Alternative operation methods when the remote control is unavailable.

3.22 HOW TO CLEAN THE AIR FILTERS

Step-by-step guide for cleaning the air filters.

3.23 HOW TO CLEAN THE AIR CONDITIONER

Instructions for cleaning the exterior of the air conditioner.

3.24 STOWING THE CONDITIONER AT THE END OF THE SEASON

Procedures for storing the unit at the end of the cooling season.

3.25 HOW TO TRANSPORT THE CONDITIONER

Guidelines for safely transporting the air conditioner.

4 TROUBLESHOOTING

The conditioner does not work

No power, plug not inserted, excessive water, timer on.

Conditioner works only for a short period

Temperature too close to ambient, obstructed air suction.

Conditioner works but does not refresh room

Window open, heat source, crowded room, high temp, clogged filter, inadequate power.

Control panel LEDs flashing

Two green/yellow, green/yellow, red/yellow LEDs flashing.

Olimpia splendid Unico Easy Specifications

General

Energy Efficiency Class (Cooling)	A
Energy Efficiency Class (Heating)	A
Power Cord Length	1.5 m
Remote Control	Yes
Warranty	2 years
Type	Air Conditioner
Functions	Cooling, Heating, Dehumidification
Power Supply	220-240V, 50Hz
Timer	24 hours