card under direct heat such as sunlight.
5. Please be gentle with the
mechanisms that hold the SIM card and
T-Flash card. They are delicate and can
break if mishandled.
Insert the battery and secure
lanyard (optional)
Step 1 – If present, remove protective
tape from conductors on bottom right
corner of battery.
Step 2 - Insert the battery so the
conductors on the battery line up with
the conductors on the phone’s battery
port. Once inserted, the battery will sit
over the SIM card and T-Flash card (if
inserted).
Step 3 (optional) – to secure the
lanyard the back cover must be
removed. The lanyard eyelet is located
above the headphone jack. Position the
thin threading cord on the lanyard over
To Next Page
Loading...
