3. Place/sit the phone into the cradle
charger (see image on front cover of
manual).
Other devices
The phone can be charged by
connecting the USB charging cable to a
computer/car charging port.
Important Information
When connected to a charger, the red
battery light will be displayed. If the
battery is charging the light will flash. If
the battery is fully charged the light will
constantly illuminate. Please note the
notification light status must be on for
this light to be displayed. If the phone
is powered off, when connected to a
charger it will not automatically turn on
after it has received sufficient charge. It
must be manually powered on. To
power the phone on press and hold
the power key for 3 seconds.
To Next Page
Loading...
