Oliveri Santorini User Manual

The latest technological advances are used in the
manufacturing process of our sinks which are tested a
number of times during the production process to ensure
they comply with rigorous quality standards.
Manufactured from 80% granite and 20% quartz and
resin, the sink is scratch, heat and stain resistant.
This sink can be installed on virtually any type of
benchtop, including wood, plastic, marble, etc.
Correct and proper use of your sink will ensure its
long-lasting life. Consult the Care and Maintenance
section of this manual for advice on cleaning and
regular maintenance.
PLEASE NOTE
If a washing machine or dishwasher is going to be
installed beneath the sink, proceed as follows:
• To prevent overheating, which may result in the
deformation of the sink, adjust the feet on the washing
machine / dishwasher so there is sufficient ventilation
between the appliance and the sink.
• To facilitate air circulation and cooling, we recommend
providing the cabinet base with ventilation slots.
oliveri.com.au
Installation Instructions
Santorini
ST-BL1584U
Farmhouse Undermount Sink
THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED TRADESPERSON
TF29a – ST-BL1584U Installation Instructions / June 2021 / Page 1 of 4
PRE-INSTALLATION CHECKS
Unpack & check the item is correct and no
damage has occurred during transit.
If there are any visible defects, DO NOT
PROCEED WITH THE INSTALLATION and
please contact the place of purchase
immediately.
ANY CLAIMS FOR DAMAGE WILL NOT BE
ACCEPTED AFTER INSTALLATION.
Protect your sink before and during
installation. Scratches, cracks or other
surface damage sustained during or after
the installation are NOT COVERED BY
WARRANTY.
Installation must be in accordance with
building regulations and any local
authority requirements.
CAUTION: Composite Sinks are HEAVY, be
sure to get help when lifting or moving.
STOP AND READ CAREFULLY

Oliveri Santorini Specifications

General

Brand	Oliveri
Model	Santorini
Category	Plumbing Product
Language	English

Summary

Santorini Farmhouse Undermount Sink

Qualified Tradesperson Installation Required

Product must be installed by a qualified tradesperson for safety and compliance.

Important Safety & Pre-Installation Checks

Review crucial safety information and pre-installation checks before proceeding.

Sink Handling Caution

Composite sinks are heavy; ensure assistance is available for lifting and moving.

Appliance Ventilation

Ensure sufficient ventilation for appliances installed beneath the sink to prevent overheating.

Installation Steps

Tools Needed for Installation

List of tools required for the installation process.

Sink Assembly & Preparation

Assemble the sink strainer and drain components correctly before installation.

Prepare the Sink Cabinet

Prepare the cabinet with a support shelf and holes for plumbing and pipes.

Cabinet and Benchtop Preparation

Cut Cabinet Front

Cut the front of the cabinet according to specified dimensions for sink fitting.

Cut and Install Benchtop

Cut the benchtop opening based on sink dimensions and chosen front edge style.

Seal Sink to Benchtop

Apply neutral cure silicone sealant to join the sink and benchtop, wiping away excess.

Care and Maintenance

How to Clean the Sink

Instructions for regular cleaning using soft cloth and warm soapy water.

Product Warranty Information

Details on Oliveri's warranty policy, exclusions, and claim procedures.

Pre-Installation Defect Check

Thoroughly inspect for defects before installation; do not install if faulty.

Service and Support

Guidance on initial troubleshooting and contacting the Warranty Service Agent.