no
yes
The carriage is jammed
limit scre~
yes
- Remove the carriage assembly
- Loosen the lock nut and turn scre~
(A) counterclock~ise about 3 to 4
turns fi .1
Release the carriage
and adjust the limit
screw to obtain the
clearance of 0.1 to 0.2
mm as shown in fig.3
The fixed dog assy. has a
maximum play of 0.2 mm }----
-I
no
o
sere,",
The carriage i s
st
í
11 jammed
no
Re-adjust the
scr
ev
(A)
to obtain
t
he clearance
shcvn
in fig.3
Re-insla11
the
carriage
There has been a previous
ca l l in thi s area
)-----:r;<>-j
Remove the carriage assembly
and posilion il as shown in
fi g.l
Move the carriage until a toolh of the
escapement
vhe
e l is diredly under lhe
fixed dog (fig.2). In this p~silion.
rotate lhe fixed dog assy. with your
finger.
f
i
q.}, and check for a max.
clearance of 0.2 mm as sho~n in fig.3
yes
yes
Y127
To Next Page
Loading...
