Olson Instruments NDE-360 - NDE-360 Platform Maintenance and Channels

IMPACT ECHO (IE)
www.olsoninstruments.com www.olsonengineering.com
Battery Charging:
The power supply (Item 4) must be plugged into the charger (Item 5) only. Then the
charger (Item 5) must be connected to the NDE-360 system.
Location of Battery:
The panel housing the battery is located on the back of the NDE-360 system.
Move the switch to remove the battery cover if battery needs to be replaced.
2.2 Basic Components and Maintenance of NDE-360 Platform
Power Supply
Charger
NDE-360 System
Power Supply
Charger
NDE-360 System
Time required for a fully charge of batt
ery is 8 hours.
Fully charged
battery will power the NDE-360 system for 8 – 10 hours.
Battery PanelBattery PanelBattery Panel