IMPACT ECHO (IE)
www.olsoninstruments.com www.olsonengineering.com
Channel Arrangement:
The NDE-360 system is equipped with 4 channels. There are two 4 pin
connectors per each channel. Channel 1 is located on the right hand side if facing the front screen of the
NDE-360 system. In this case, the IE test uses the Impact Echo Channel. Thus four 4 pins channel will
not be used for the IE test.
360 system or the battery to water.
Impact Echo Channel
Ch 1
Ch 2
Ch 3
Ch 4
Wideband Channels
Highpass Channels
Channels used for other tests such as Sonic Echo
Impact Echo Channel
Ch 1
Ch 2
Ch 3
Ch 4
Wideband Channels
Highpass Channels
Channels used for other tests such as Sonic Echo
To Next Page
Loading...