Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 26
55. Before installing remaining Roof Windows, attach
Part KK - Top Ridge Caps - 1” x 5 1/2” x 47 5/8” to
top of Ridge Board. On a ladder, position 1 Cap evenly
on Ridge Board and flush with the outside. Attach with
3 - 3” screws as illustrated above. Attach 2nd Cap.
Work from the inside on a step ladder to attach.
Even with end
of Ridge Board.
56. Install remaining Roof Polygal Windows as per Steps 51-53.
To Next Page
Loading...