OLT GH88 - Page 28

Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 28
31. Locate Side Facia. Position Side Facia over the ends of the rafters. Fasten Side Facia to
Rafter ends with 6 - 1 1/2” Trim Nails per piece.
Pieces:
- 4x Side Facia
(3/4” x 4 1/2” x 47 3/4”)
Hardware:
-24x 1 1/2” Trim Nails
32. Locate Detail Plates. Position Side Detail Plate on Corner Post capping both the Post and the
Side Facia. Attach plate with 4 - 1 1/2” Trim Nails. Position Ridge Detail Plate over top of King Stud,
underneath the Metal Ridge Cap. Attach with 4 - 1 1/2” Trim Nails.
Pieces:
- 4x Side Detail Plate
(1/2” x 4” x 6 1/8”)
- 2x Ridge Detail Plate
(1/2” x 3 1/2” x 9 5/8”)
Hardware:
- 24x 1 1/2” Trim Nails