Olympia Water Systems OROS-50 User Manual

INSTALLATION INSTRUCTION
& OWNER’S MANUAL
Olympia Water Systems • www.olympialtration.com Manual Version 1.4, 2017 Dec. All Rights Reserved.
System Tested and Certied by NSF International against NSF/ANSI 42 for the reduction of Chlorine, Taste
and Odor and 58 for the reduction of Total Dissolved Solids. Please refer to the Performance Data Sheet for
complete reduction data.

Olympia Water Systems OROS-50 Specifications

General

Type	Reverse Osmosis System
Tank Capacity	3.2 Gallons
Dimensions	14.5 x 5.25 x 17.5 inches (System); 15 x 11 x 11 inches (Tank)
Weight	20 lbs (System); 8 lbs (Tank)
Operating Pressure	40-80 PSI
Capacity	3.2 gallons
Water Production Rate	50 GPD
Filtration Stages	5
Power Supply	110V
Operating Temperature	40-100°F
Voltage	110V

Summary

Before Installation Steps

RO System Installation Guide

Filter Housing Assembly

Instructions for assembling the filter housings onto the main system bracket.

RO Membrane Installation

Steps for correctly installing the RO membrane into its designated housing.

Feed Water Connection

Drain Saddle Connection

Connecting the Storage Tank

Connecting the Entire System

System Start-Up Procedure

Procedures for turning on the system, checking for leaks, and flushing.

RO System Maintenance Schedule

Filter Replacement Schedule

Schedule for replacing filters and membranes to ensure optimal system performance.

Filter Replacement Procedure

Detailed steps for removing and replacing sediment and carbon filters.

RO Membrane Replacement

Procedure for replacing the RO membrane in the system.

Post Filter Replacement