Need help?Do you have a question about the Olympia Carrera De Luxe MD and is the answer not in the manual?
General| Brand | Olympia |
|---|---|
| Model | Carrera De Luxe MD |
| Category | Typewriter |
| Language | English |
Describes core operational parameters of the typewriter.
Details hardware components, including power supply, motors, and keyboard.
Details LCD type, control PCB components, and versions.
Information on battery specifications and environmental operating parameters.
Lists and illustrates the five major typewriter assemblies.
Describes the functional electronic components of the typewriter.
Details components and operation for the original control PCB version.
Details components and operation for the 2nd version control PCB.
Power supply circuit and connection diagrams for both versions.
Keyboard layout and contact diagrams.
Wiring diagrams for Carrier, Selection, LF, and Ribbon motors.
Wiring diagrams for the hammer solenoid and left end switch.
Layouts and block diagrams illustrating the LCD display functionality.
Component layout diagrams for both original and 2nd version control PCBs.
Detailed schematic diagram of the original version control PCB.
Schematic diagram for the 2nd version control PCB, section 1 of 3.
Schematic diagram for the 2nd version control PCB, section 2 of 3.
Schematic diagram for the 2nd version control PCB, section 3 of 3.
General steps and guidelines before performing adjustments.
Procedure for performing the self printing test function.
Steps to enter and exit the typewriter's adjustment modes.
Details specific adjustments.
Detailed steps to adjust the carrier home position accurately.
Procedure for aligning the selection motor home position.
Steps for correctly positioning the hammer mechanism.
Adjusting carrier and platen alignment for print quality.
Adjusting tape lift and ribbon positioning for corrections.
Procedure for setting the correct carrier drive belt tension.
Adjusting the line locator for proper paper alignment.
Instructions for disassembling and reassembling the typewriter's outer housing.
Post-reassembly adjustments for the housing.
Guide to removing the keyboard assembly and control PCB.
Information on control PCB revisions, compatibility, and design changes.
Explains program part codes and cable connection procedures.
Guide on utilizing the typewriter's spelling check feature.
Instructions for converting the system to enable spelling check functionality.
Detailed steps for removing the chassis frame and platen assembly.
Instructions for removing the LF motor and carrier drive mechanisms.
Information on motor replacements and reassembly steps.
Guide to removing the ribbon cassette base and drive components.
Reassembly steps and necessary readjustments for the ribbon drive.
Instructions for disassembling the selection and hammer mechanisms.
Reassembly steps for selection/hammer and motor replacement details.
Complete procedure for removing, reassembling, and readjusting the power supply.
Guidelines for routing internal wiring harnesses.
Specific wire routing for the LCD and carrier components.
Details on lubricants and their application points for smooth operation.
Step-by-step guide for cleaning various typewriter components.
Common issues related to power supply and initial typewriter operation.
Beeper, carrier movement, and platen feeding problems.
Troubleshooting steps for incorrect character printing and correction failures.
Solutions for ribbon feed malfunctions and LCD display errors.
To Next Page
