To Next PageTo Next Page
Need help?Do you have a question about the Olympia EKM 2000 and is the answer not in the manual?
General| Brand | Olympia |
|---|---|
| Model | EKM 2000 |
| Category | Measuring Instruments |
| Language | English |
Details the functions of UP, DOWN, PRICE, and OVERLOAD buttons for device control and settings.
Describes the visual indicator that signals an overload condition on the device.
Explains the layout and content displayed in the top-right, top-left, and bottom panes of the LCD.
Instructions for installing two 1.5V button cell batteries, emphasizing correct polarity.
Steps to reset the instrument by removing and reinserting batteries while holding the OVERLOAD key.
Enters clock setting mode using the UP and OVERLOAD keys.
Adjusts hour, minute, and weekday digits using UP/DOWN keys and confirms with OVERLOAD.
Toggles between 12-hour and 24-hour display modes by holding the UP key.
Switches between weekday and second display modes by pressing the UP key.
Illustrates how to cycle through different data displays in the top pane using the DOWN key.
Details the display sequence for total energy, on-time, price per KWh, and total cost.
Explains the steps to set Regular Price (RP) and Discount Price (DP) modes.
Monitors line frequency (Hz) and line voltage (V) in the top display panes.
Displays instantaneous current (A) and wattage (W), along with maximum recorded values.
Shows the power factor value, crucial for calculating actual power consumption.
Procedure to reset maximum current and wattage readings by holding the DOWN key.
Alerts users to exceeding a preset load capacity with a flashing symbol and LED.
Guides on selecting overload warning mode (W or A) and setting the desired value.
Displays total accumulated energy used by the appliance in KWh since measurement start.
Shows the total on-time of the appliance in Hour/Minute/Second or Hour/Minute format.
Details setting electricity prices (Regular and Discount) and calculating total cost.
Displays the cumulative energy cost, calculated based on set prices per KWh.
Lists operating voltage, current, measurable current, voltage range, and display ranges.
Provides accuracy percentages for voltage, current, wattage, and KWh measurements.
Defines factors affecting accuracy and conditions for operation (temperature, humidity).
Guidelines for cleaning the device safely, including unplugging and using a dry cloth.
Details the 24-month guarantee period, required documents, and service contact information.
Advises on indoor use, keeping away from children, pets, and water.
Prohibits unauthorized modifications and specifies that repair work must be done by trained personnel.
