16
G
Sorting
With this function, which is always activated, the first
bank note is used as a reference for those following. If
the machine detects a bank note which deviates from
the reference note, the machine stops.
d appears in the
display, the background of which turns red. The deviat
ing bank note can be removed.
Whether the removed bank note should be counted or
not can be defined in the settings (refer to Settings).
Settings
The sensitivity of the sensor and other parameters can
be modified using the respective Settings function.
Æ Press the SET button for a few seconds until the acous
tic signal stops.
Ê
d05 and C5100 appear in the display.
d05 represents the current value of the memory seg
ment
C5100. You can change the value using the ar
row buttons.
Æ Press the SET button again.
Ê The next memory segment appears together with the
value.
After pressing the SET button for the last memory seg
ment you exit from Setting function.
To Next Page
Loading...
