Olympia NC 520 Plus - Page 17

17
G
The table below contains the default settings and functional assignments of the memory segments.
Memory
segment
Default
value
Function Settings
C5100 d05
UV-sensitivity Setting range 0 - 9
The higher the value, the lower the sensitivity
C5200 d05
MG-sensitivity Setting range 0 - 9
The higher the value, the lower the sensitivity
C5300 d05
Detection of double bank
notes
Setting range 0 - 9
The higher the value, the lower the sensitivity
C5400 d09
Brake Setting range 0 - 9
The higher the value, the higher the sensitivity
C5500 d09
Counter wheel Setting range 0 - 9
The higher the value, the higher the sensitivity
C5600 d08
Transportation Setting range 0 - 9
The higher the value, the lower the sensitivity
C5700 d08
(Internal function) (Do not change)
C5800 d01
(Internal function) (Do not change)
C5900 d00
(Internal function) (Do not change)
C5A00 d01
Count / Do not count bank
notes which have been
sorted out.
d01: Count
d02: Do not count
C5b00 d02
(Internal function) (Do not change)
C5C00 d00
(Internal function) (Do not change)
C5d00 d02
Detect size differences of
the bank notes
Setting range 0 - 9
The higher the value, the lower the sensitivity
C5E00 d08
(Internal function) (Do not change)
C5F00 d04
(Internal function) (Do not change)
To reset the machine to its default settings, press the RESTART-button while switching the machine on.