What does 'Disconnect' error mean on Olympia Omega 1640 All in One Printer?
If your Olympia All in One Printer shows a 'Disconnect' error, it means the connection to the server was cut. Consult with the network administrator.
How to fix disorganized text in Olympia Omega 1640's window?
If the text in the window of your Olympia All in One Printer appears disorganized, the browser window might be too small; try increasing its size. Also, an appropriate font size might not be selected; specify an appropriate font size for the computer and in the browser.
What causes 'Cannot Get IP' error on Olympia Omega 1640?
If your Olympia All in One Printer displays a 'Cannot Get IP' error, it means that the IP address could not be assigned by the DNS or DHCP server. Consult with the network administrator.
How to fix 'Cannot Connect' error on Olympia Omega 1640 All in One Printer?
If you're getting a 'Cannot Connect' error on your Olympia All in One Printer, it means a connection to the server cannot be established. First, check that the Ethernet cable is correctly connected. Next, verify the parameter settings in the “E-MAIL SETTING 1”, “E-MAIL SETTING 2” and “NETWORK SETTING” menus. If the issue persists, consult with the network administrator.
Why is transmission not possible with my Olympia All in One Printer?
If transmission is not possible with your Olympia All in One Printer, the connections might be incorrect. Check the indicators on the hub and verify the connections. Also, the settings necessary for the device might not be registered; specify the necessary network settings. Finally, the LAN cable could be damaged; try replacing it.
What to do if my Olympia Omega 1640 shows a communication error?
If your Olympia All in One Printer displays a communication error, it indicates that communication with the server is not possible due to a problem with the machine, the network, or the server itself. Check the transmission/reception results report. You may need to consult with the network administrator.
What to do if Olympia Omega 1640 All in One Printer transmits but the image doesn't output at the recipient's end?
If the Olympia All in One Printer can transmit, but the image doesn't output at the recipient's terminal or computer, it could be that the recipient's terminal is unable to handle the sent image. Try changing the size, resolution, and compression encoding method to settings supported by the recipient’s terminal, and then resend the data. Also, if the document was sent with no text inserted, some e-mail applications may not be able to open the attached file; insert text into the document before sending.
General| Brand | Olympia |
|---|---|
| Model | Omega 1640 |
| Category | All in One Printer |
| Language | English |
To Next Page
