To Next Page
M
Matthew RamosSep 9, 2025
Why do some deleted characters remain in the window of my Olympia omega 2140?
- MMary AndersenSep 9, 2025
The operation differs depending on the browser used. Reload the browser window or rescan.
Why do some deleted characters remain in the window of my Olympia omega 2140?
The operation differs depending on the browser used. Reload the browser window or rescan.
What to do if Olympia omega 2140 transmits but the image doesn't output at the recipient's end?
If the Olympia All in One Printer can transmit, but the image doesn't output at the recipient's terminal or computer, it could be that the recipient's terminal is unable to handle the sent image. Try changing the size, resolution, and compression encoding method to settings supported by the recipient’s terminal, and then resend the data. Also, if the document was sent with no text inserted, some e-mail applications may not be able to open the attached file; insert text into the document before sending.
What to do if my Olympia All in One Printer shows a communication error?
If your Olympia All in One Printer displays a communication error, it indicates that communication with the server is not possible due to a problem with the machine, the network, or the server itself. Check the transmission/reception results report. You may need to consult with the network administrator.
Why is transmission not possible with my Olympia omega 2140 All in One Printer?
If transmission is not possible with your Olympia All in One Printer, the connections might be incorrect. Check the indicators on the hub and verify the connections. Also, the settings necessary for the device might not be registered; specify the necessary network settings. Finally, the LAN cable could be damaged; try replacing it.
How to fix 'Cannot Connect' error on Olympia omega 2140?
If you're getting a 'Cannot Connect' error on your Olympia All in One Printer, it means a connection to the server cannot be established. First, check that the Ethernet cable is correctly connected. Next, verify the parameter settings in the “E-MAIL SETTING 1”, “E-MAIL SETTING 2” and “NETWORK SETTING” menus. If the issue persists, consult with the network administrator.
What causes 'Cannot Get IP' error on Olympia All in One Printer?
If your Olympia All in One Printer displays a 'Cannot Get IP' error, it means that the IP address could not be assigned by the DNS or DHCP server. Consult with the network administrator.
How to fix streaks in Olympia All in One Printer copy?
Streaks in the copy can be caused by a dirty original glass. Wipe the glass with a soft, dry cloth. Alternatively, the document pad might be dirty; clean it with a soft cloth dampened with a mild detergent. If the original document was printed on highly translucent material, place a blank sheet of paper on top of the document.
Why Olympia All in One Printer copies are too light?
The copy might be too light because the copy density is set too light. To fix this, press the [Density] key and select the desired copy density. Another reason might be that the paper is damp. In that case, replace the paper with new paper.
Why does “·” appear in the window of my Olympia omega 2140?
Depending on the browser, this character may appear.
What does 'Memory File Full' mean on Olympia All in One Printer?
If your Olympia All in One Printer displays 'Memory File Full', it indicates that, while sending email, the maximum number of stored files was used.
General| Functions | Print, Copy, Scan |
|---|---|
| Print Technology | Inkjet |
| Print Speed (Black) | 20 ppm |
| Print Speed (Color) | 16 ppm |
| Print Resolution | Up to 4800 x 1200 dpi |
| Scan Type | Flatbed |
| Scan Resolution | Up to 1200 x 1200 dpi |
| Connectivity | USB 2.0 |
| Supported Media Types | Plain Paper, Photo Paper, Envelopes, Labels |
| Printer Type | All-in-One |
| Ink Cartridges | Black, Color |
| Paper Handling | 100-sheet input tray |