ProHome
79
1QUICK REFERENCE GUIDE
ProHome 8791
Please refer to the Accessories for Alarm Systems in the Protect Se-
ries operating manual and detailed Alarm System Operating Manual
for detailed information on assembly, installation and operation. Both
documents are enclosed with the base unit.
Connecting the Base Unit
In order to ensure unrestricted use of the base unit, you need a SIM card
from a mobile phone provider. A SIM card is not included in the equip-
ment supplied.
1 Insert a SIM card in the base unit.
2 Insert three batteries (AAA) in the battery compartment paying
attention to correct polarity.
3 Connect the base unit to the power socket.
Package Contents
Base unit 1
Power adapter plug 2
Convenient remote control 1
Motion detector 1
Outdoor siren 1
IP camera OC 1280 P 1
Window/door contact 2
Batteries
7 x AAA cell
6 x round cell (AA)
1 x round cell (CR 2032)
Assembly material Base unit legs, screws, dowels
Operating manual 1
Please check the contents of the package carefully. If anything is missing
or damaged, you must NOT put the alarm system into operation! In such
cases, contact your sales outlet, with your purchase receipt to hand, or
the OLYMPIA service centre.
Keep the packaging box for the alarm system in a safe place for possible
return delivery.
&RQȴJXULQJWKH$ODUP6\VWHP
&RQȴJXUHWKHDODUPV\VWHPDFFRUGLQJWR\RXUUHTXLUHPHQWV)RUIXUWKHU
information, please refer to the detailed operating manual provided with
the alarm system.
www.olympia-prohome.de
SIM card
micro USB port
RESET
Antenna switch
To Next Page
Need help?
General
