Olympia SM 9 - Typewriter Functions and Adjustments; Ribbon Selection and Management; Paper Insertion Procedure; Margin Setting and Release

ction
eof
the
bichrome ribbons,
in
ch
(26)
should
be
set
the select tion for black or to the
N ttom position for red. The white
bol or) position 1s for stencils. In the
(oot single-color nbbons, these should
versed once the top half is worn
OA
(to
obtain
the
maximum possible
use
of the lower section of the ribbon.
Ribbon advance and return are automatic.
=I
ing the paper
pari to its center position
and raise the paper support (15) by
applying pressure to the release button
Position
the
paper against
the
adjustable paper guide insert between
the
platen
and
erasure table
and
rotate
either of the platen knobs (6/20) to bring
the
paper
to
the
desired level.
To
align
the paper horizontally and to insert the
desired number
of
copies, move forward
the paper release lever
Selecting
the margins
The L, Ho and R.H. Margins can be
selectod
by
deprossing
the
margin stops
(2) and sliding them to the desired
positions.
Line spacing selector (8)
The desired line spacing can be soloctad
by
moving
the
selector
to
the
appropnate
setting.
Margin release lever
(11)
The
L.
H.
and
R.
H.
margins
can
be
overriden by the operation of this lever.
Platen release (8)
The platen can be unlocked by the
movement
of
this
lever
to
the
rear
to
allow any desired height to be selected
when,
for
example, typing
on
lined forms.
Tabulation
Before tabulating, operate the total
clearance lever (18) to clear previously
selected stops, slide the carriage to the
desired setting, and move the tab set/
clear fever (12) to the '+' setting.
Individual stops can be cleared by select-
ing
the
desired
stop
and
moving
the
set/clear lever to the '~’ setting.
Impression regulator
(10)
The desired impression energy can be
selected by moving the regulator to the
‘+’
setting
for
the
maximum number
of
copies, and to the '~’ setting for the
minimum number of copies.
Correcting spacebar
(28)
To
correct
a
typing error, erase
the
complete word,
and
slide
the
Carriage
to
the last letter of the preceding word.
Operate
the
spacebar once
only,
re-operate a second time, holding it down,
and
type
the
first letter
of
the
wrongly-
typed word before releasing
the
spacebar.
Re-operate and hold down the spacebar
and type the next letter of the word,
repeating this process as required.
The
best
fright)
The bot bypewrd ter
The
best typewriter