Press the shutter release button fully to
start the self-timer.
* The self-timer lamp will blink and there
will be a "beep-beep" sound indicating
that the shutter will be engaged within 10
seconds. 2 seconds before the shutter is
engaged, the self-timer lamp will remain
on and the beeping sound will continue
without interruption.
To avoid incorrect exposure in the self-
timer mode, ensure that strong light does
not enter through the Viewfinder before the
self-timer mode is started.
* Once the shutter is released, the self-
timer mode is disengaged.
The self-timer can be cancelled at any time
before the shot is taken by performing any
of the following operations:
(1) Pressing the SELF-TIMER button
(2) Sliding the power switch to OFF
(3) Pressing the RESET button
22
To Next Page
Loading...
