Spot Metering
You can set the exposure for critically lighted subjects. If the pop-up flash is not
engaged, the activation of spot metering is especially effective.
27
Move the camera so that the section to be
metered is in the center of the Viewfinder.
Press the SPOT button.
* The SPOT indicator blinks in the
Viewfinder and the LCD panel, and the
exposure (AE) is locked. If you remove
your finger from the SPOT button, this
exposure will be disengaged and it will
return to normal operation. To use the
focus lock jointly, simply press the
release button lightly to the first stop.
(Spot metering can be performed
regardless of which button is pressed
first.)
To Next Page
Loading...
