SHORT COURSES HTTP://WWW.SHORTCOURSES.COM
17
image. With the C-700 you can choose an ISO of 100, 200, 400,
or 800 (page 44).
■ Turn on Fulltime AF so the camera is always focused and
ready to shoot (page 50).
TURNING FULLTIME AF ON AND OFF
1. With the Mode Dial set to P, A/S/M, or Movie, press OK/
Menu to display the top menu, then press the right arrow
on the arrow pad to display the Mode menu. With the
CAMERA tab highlighted, press the right arrow to activate
the menu.
2. Press the up or down arrow on the arrow pad to highlight
FULLTIME AF, then press the right arrow to display
choices.
3. Press the up or down arrow to highlight ON or OFF and
press OK/Menu once to confirm the setting and again to
hide the menu.
USING FOCUS LOCK
1. With the Mode Dial set to any shooting mode compose the
picture so the subject you want to set focus on is in the AF
target mark in the center of the display.
2. Press the shutter button halfway down and hold it there to
lock in the focus (and exposure).The focus confirmation
mark glows a steady green when focus is locked.
3. Without releasing the shutter button, recompose the scene
and press the shutter button the rest of the way to take the
picture.
USING MANUAL FOCUS
1. With the Mode Dial set to P or A/S/M, hold down the OK/
Menu button for 1 second to display the manual focus
screen with AF highlighted in the lower right corner of the
display.
2. Press the right arrow on the arrow pad to select MF in the
lower-right corner of the monitor.
3. As you watch the enlarged image on the display, press or
hold down the up or down arrow on the arrow pad to
move the pointer on the scale to the distance setting you
want to focus on. If you move the pointer down past the
© COPYRIGHT 2001 BY DENNIS P. CURTIN
18
closest distance, a scale with even closer distances appears.
4. Do one of the following:
■ Take the picture, then press the arrows on the arrow pad
to change the focus and shoot again.
■ Take the picture, then press the left arrow on the arrow
pad to highlight AF and press OK/Menu to return to
autofocus.
■ Hold down OK/Menu to save the setting and hide the
menu. MF is displayed in red in the lower right corner of
the display. To adjust focus or return to autofocus, repeat
Steps 1–4 but select AF and press OK.
SELECTING FEET OR METERS
1. With the Mode Dial set to P or A/S/M, press OK/Menu to
display the top menu, then press the right arrow on the
arrow pad to display the Mode menu.
2. With the CAMERA tab highlighted, press the down arrow
to highlight the SETUP tab, then press the right arrow to
activate the menu.
3. Press the up or down arrow on the arrow pad to highlight
m/ft, then press the right arrow to display your choices.
4. Press the up or down arrow on the arrow pad to highlight
your choice, then press OK/Menu once to confirm your
selection and again to hide the menu.
SELECTING IMAGE SHARPNESS
1. With the Mode Dial set to P or A/S/M, press OK/Menu to
display the top menu, then press the right arrow on the
arrow pad to display the Mode menu.
2. With the CAMERA tab highlighted, press the down arrow
to highlight the PICTURE tab, then press the right arrow to
activate the menu.
3. Press the up or down arrow on the arrow pad to highlight
SHARPNESS, then press the right arrow to display your
choices.
4. Press the up or down arrow on the arrow pad to highlight
your choice (NORMAL is the default), then press OK/Menu
once to confirm your selection and again to hide the menu.
To Next Page
Loading...
