0 Exposure lock AEL / MEMO
AEL : AE lock
● The exposure is locked until single-frame shooting is performed. After you shoot, the
indication disappears.
MEMO : AE memory
● The exposure is locked and retained in memory even after shooting.
! Drive mode
● Displayed when the drive mode is selected by pressing the DRIVE button.
No indication: Single-frame shooting, : Sequential shooting, : AF Sequential
shooting, : Self-timer shooting, BKT: Auto bracket
@ Spot Metering/Macro mode
● Displayed when the Spot Metering/Macro mode is selected by pressing the
(Macro/Spot) button.
No indication: Spot Metering/Macro off, : Spot metering, : Macro, : Spot
Metering/Macro
# White balance
● Displayed when WB is set on the Menu.
No indication: Auto, : Daylight, : Overcast, : Tungsten light, :
Fluorescent, : One touch white balance
$ ISO
● Displays the ISO (AUTO, 100, 200, 400 or 800) selected on the Menu. When set to
AUTO, the ISO changes to 100 when the Mode dial is set to A/S/M. When AUTO is
selected, the ISO is automatically increased in low-light situations when the flash is
not used. This is to prevent blurring from camera shake.
% Manual Focus MF
● Displayed when locking focus using the Manual focus function.
^ AF confirmation mark
● Lights when the focus and exposure are locked by pressing the Shutter button
halfway. If the subject is out of focus, the mark blinks.
To Next Page
Loading...
