34 En
En
All-frame erase
1 In the top menu, select MODE MENU CARD CARD
SETUP, and press d.
2 Press ac to select R ALL ERASE, then press e.
3 Press a to select YES, then press e.
• All the pictures are erased.
J FORMATTING (CARD SETUP)
This function lets you format a card. Formatting prepares cards to receive
data. Before using non-Olympus cards or cards which have been formatted
on a PC, you must format them with this camera.
• All existing data, including protected pictures, are erased when the
card is formatted. Make sure that you save or transfer important
data to a PC before formatting a card.
1 In the top menu, select MODE MENU CARD CARD
SETUP, and press d.
•The I FORMAT screen is displayed.
When h is selected:
In the top menu, press d to select CARD SETUP.
When q is selected:
In the top menu, select MODE MENU CARD CARD
SETUP, and press d. Press ac to select I FORMAT,
then press e.
2 Press a to select YES, then press e.
•The BUSY bar is displayed and the card is formatted.
Note
basic_e_d4226_7.fm Page 34 Thursday, February 5, 2004 11:47 AM
To Next Page
Loading...
