15
En
INSERTING A CARD
1
Make sure the power switch is set to OFF.
2
Open the card cover.
3
Insert a card.
Card cover
1
2
Insert the card into the rear
slot while keeping it straight.
The slot clicks when the card
is inserted fully.
To remove the card
Push the card and release. The
card ejects slightly from the slot.
Grasp the end, and remove.
Contact
Notch
d4227_basic_e_00_bookfile_7.book Page 15 Monday, October 25, 2004 10:12 AM
To Next Page
Loading...
