54
Chapter 4
1
Point the camera towards a subject, and place the subject on the AF
target mark.
2
Press the shutter button halfway.
● When the focus and brightness
(exposure) are locked, the green lamp
lights.
● To warn you of camera shake, will
blink. In this case, press the (flash)
switch to pop up the flash (P. 63).
● If the (flash stand-by) mark lights,
the flash will fire automatically.
3
Press the shutter button all the way.
● The bottom of the memory gauge lights, the card access lamp blinks, and
the camera begins storing pictures on the card.
● Number of still pictures that can be stored on a 16 MB card T
HQ record mode (1984 x 1488): Approx. 21
SQ2 record mode (640 x 480 NORMAL): Approx. 99
Number of storable
still pictures
AF target mark
Memory gauge
To Next Page
Loading...
